Maxx Ice MIM50 Manual de uso y cuidado Pagina 22

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 27
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 21
20
12. Repeat step 5-6 above with clean water to rinse the ice-making system thoroughly.
Drain the water as indicated in Step 11. This will complete ice-making system
cleaning. Then press the controller to “OFF”
13. Turn the machine ON and replace the front panel.
14. Discard the first two ice harvests. DO NOT USE any ice produced from the cleaning
solution.
Bin Cleaning
The ice storage bin should be sanitized occasionally. Clean the water trough before the ice
maker is used first time and reused after stopping for an extended period of time . It is
usually convenient to sanitize the trough after the ice making system has been cleaned,
and the ice storage bin is empty.
1. Disconnect the power to the unit.
2. Open the door, take out the removable ice storage bin. with a clean cloth, wipe down
the interior of unit and ice bin with a sanitizing solution made of 1 ounce of household
bleach or chlorine and 2 gallons of hot (95ºF --115ºF) water.
3. Rinse thoroughly with clear water.
4. Screw off the drainage nut to drain completely.
5. Put the ice storage bin inside the unit.
6. Reconnect power to the unit.
The ice scoop should be washed regularly, wash it just like any other food containers.
Condenser cleaning
A dirty or clogged condenser prevents proper airflow, reduces ice making capacity, and
causes higher than recommended operating temperatures that may lead to component
failure. Have the condenser cleaned at least once every six months.
1. Unplug the ice maker or disconnect power.
2. Gently pull off the lower front grille.
3. Locate the condenser filter. This can be lifted out and
cleaned with a brush or flowing water.
4. Remove dirt and lint from the condenser fins and the unit
compartment with the brush attachment of a vacuum cleaner.
5. Put back the filter and reassemble the front lower grille.
DO NOT use solvent-based cleaning agents or abrasives on the
interior. These cleaners may transmit taste to the ice cubes and
damage or discolor the interior.
Condenser
surface
Vista de pagina 21
1 2 ... 17 18 19 20 21 22 23 24 25 26 27

Comentarios a estos manuales

Sin comentarios